Drainage
Drain jetting in Ballarat
When a drain keeps blocking with roots, grease or silt, a standard clear only punches a hole through it. Jetting scours the whole pipe clean with high-pressure water, so it stays clear for longer.
- Plumbing, gas and drains
- Certificates of compliance where required
- Local Ballarat team

When a drain needs jetting
- It blocks again within weeks of a standard clear.
- Roots have been found in the line.
- The kitchen drain is slow from years of fat and grease.
- A stormwater line is packed with silt or leaves.
Why a standard clear isn't always enough
A drain machine gets water moving but leaves grease stuck to the pipe wall and roots only trimmed, so the drain closes up again. Jetting cleans the full width of the pipe. It won't fix a cracked or collapsed pipe, though, which is why our drain specialist follows up with a camera on a drain with a history.
How we jet your drain
Get into the line
The jetter hose goes in at the inspection shaft, the grated gully outside or a stormwater pit, as close to the blockage as we can get.
Jet the pipe clean
The nozzle drives itself along the pipe, breaking up the blockage ahead and scouring the wall on the way back.
Check the result
We run water through the fixtures, and if the drain has a history of blocking, the camera goes down to check the pipe itself. Our drain specialist carries a jetter and a camera.

What it costs
- Drain jetting
- Ask when you book and we'll explain how it's charged.
- Jetting with a camera inspection
- Often done together on a drain that keeps blocking.
Questions people ask
Is jetting better than a drain machine?
For roots, grease and silt, yes, because it cleans the whole pipe. For hair in a shower waste, a machine does the job and jetting isn't needed.
Does jetting get rid of tree roots for good?
No. It cuts them back to the pipe wall, but they regrow through the same joint. Repairing that section is what stops them. See tree roots and sewer repairs.
How often should a drain be jetted?
Only when it needs it. If it needs jetting every few months, there's a fault in the pipe, and a camera inspection will show whether repairing it is cheaper.
Is hydro jetting the same as drain jetting?
Yes. Hydro jetting, high-pressure jetting and water jetting all mean the same thing.
How it works
How a job works
Call or book online
Tell us what's happening and where. A photo of the problem or the appliance label helps.
We talk it through
We'll get back to you, and if the job needs seeing before it can be priced, we'll book a time to come out.
Details in writing first
Before work starts you get the plumber's name, licence or registration number and our business address in writing.
Done and tested
The job is tested before we leave, with a certificate of compliance where one is needed.
Enquire
Tell us what's going on
Send the details and a photo or two and we'll get back to you to book it in. If water or gas is escaping, call 0438 356 081 instead.
Form not loading? Open the booking form in a new tab or call 0438 356 081.
Drainage across Ballarat
Our team works across Ballarat and the surrounding towns.
Need a plumber in Ballarat?
Call 0438 356 081 or book online and we will get back to you.
