Gasfitting

Gas hot water repairs in Ballarat

No hot water? Our team repairs and services gas storage and continuous flow systems across Ballarat. From 1 March 2027 a gas system that can't be repaired must in most cases go electric, so we'll always check whether yours can be fixed first.

  • Plumbing, gas and drains
  • Certificates of compliance where required
  • Local Ballarat team
A plumber with the cover off an outdoor gas storage hot water unit beside a Ballarat weatherboard house, checking the burner

When to call us

  • No hot water, or the pilot keeps going out.
  • Lukewarm water, or it runs out sooner than it used to.
  • A continuous flow unit showing an error code or cutting out.
  • Water leaking from the tank or pooling at the base.
  • Soot, scorch marks or a gas smell around the unit. Stop using it until we've checked it.

Repair or replace?

Most gas hot water faults are a part we can replace: the thermocouple, gas valve, burner or igniter. A storage tank that's rusted through and leaking can't be patched, so that one means a new system.

The 1 March 2027 rule only applies when a gas system breaks and can't be repaired. Until then you can keep it, service it and fix it. If yours is near the end of its life, we'll price the replacement before it fails, so you're not deciding in a cold snap. See hot water replacement.

How we repair it

1. Find the fault

We check the gas supply, ignition, burner, flue and valves, then read any error code. A photo of the unit's label when you book helps us bring the right parts.

2. Fix and test

We replace the faulty part, clean and adjust the burner, leak-test the connections and check it heats to temperature.

3. If it can't be fixed

We'll tell you why and talk you through the replacement options. A replacement comes with your certificate of compliance within 5 days.

Call 0438 356 081 or book online.

Replacing a thermocouple on a gas storage hot water unit, access panel removed

What it costs

Repairs are priced on the fault and the part. A replacement is quoted once we've seen your setup. We charge a call-out fee plus an hourly rate, or a fixed price when the job needs a quote first Typical replacement prices are in our guide to what a new hot water system costs.
Repair
Depends on the fault and part
Service
Ask when you book
Replacement system
Quoted once we've seen your setup

Questions people ask

Can gas hot water still be repaired after 2027?

Yes. The rule only kicks in when a gas system breaks and can't be repaired. Our guide to the 1 March 2027 rule covers the exemptions and rebates.

Why does my pilot light keep going out?

Usually a worn thermocouple or a dirty pilot. It's a safety shut-off, so relighting it again and again won't fix the cause. Book a repair and we'll sort it.

Should gas hot water be serviced?

Yes, at least every two years, Energy Safe Victoria recommends. Book it alongside your gas heater service.

Is no hot water an urgent repair for renters?

Yes. Consumer Affairs Victoria lists hot water that isn't working as an urgent repair. Tell your rental provider or agent straight away. See plumbing emergencies.

How it works

How a job works

  1. Call or book online

    Tell us what's happening and where. A photo of the problem or the appliance label helps.

  2. We talk it through

    We'll get back to you, and if the job needs seeing before it can be priced, we'll book a time to come out.

  3. Details in writing first

    Before work starts you get the plumber's name, licence or registration number and our business address in writing.

  4. Done and tested

    The job is tested before we leave, with a certificate of compliance where one is needed.

Enquire

Tell us what's going on

Send the details and a photo or two and we'll get back to you to book it in. If water or gas is escaping, call 0438 356 081 instead.

Gasfitting across Ballarat

Our team works across Ballarat and the surrounding towns.

See the areas we cover

Need a plumber in Ballarat?

Call 0438 356 081 or book online and we will get back to you.