Leak detection and repair

Slab and underground leak repairs in Ballarat

A leak under a concrete floor or in the pipe across your yard can run for months unnoticed. Our team finds it, then gives you the options: repair it where it is, or run a new pipe around it.

  • Plumbing, gas and drains
  • Certificates of compliance where required
  • Local Ballarat team
A trench in a Ballarat front yard exposing the water service pipe between the meter and the house, with a repaired joint visible

Signs of a slab or underground leak

  • A warm patch on a tiled or concrete floor.
  • Damp or lifting floor coverings with no wet area nearby.
  • A strip of lawn that stays soggy or greener in dry weather.
  • The meter keeps moving with every tap off.
  • Lower water pressure, or hot water running out sooner.

Why it's worth finding early

A leak in the slab wets the ground under your house, and one in the yard pipe runs up your bill every day. Both get worse, not better.

How we fix it

1. Find which line it's on

We confirm water is escaping at the meter, then check whether it's the hot side or the cold side.

2. Pinpoint it

We isolate and test sections of pipe to find the leaking run, so only that part of the floor or yard is opened.

3. Repair or re-run

We either fix the pipe where it is, or cap it off and run a new line through the walls, roof space or a new trench. We'll talk you through which suits your house before we start.

Plumbing work worth $750 or more comes with a certificate of compliance within 5 days.

Warm floor or soggy lawn? Call 0438 356 081 or book online.

A section of slab cut open in a laundry floor to reach a leaking copper hot water pipe

What it costs

Finding the leak is priced on the time it takes. The repair depends on depth, what's above the pipe and whether it's repaired in place or re-run. We charge a call-out fee plus an hourly rate, or a fixed price when the job needs a quote first Typical Ballarat prices are in our guide to what a plumber costs.
Finding the leak
Depends on the time it takes
Repair in place
Depends on depth and what's above the pipe
Re-running the pipe
Depends on the length and route

Questions people ask

Can a slab leak be fixed without digging up the floor?

Often, yes. We can cap the leaking pipe and run a new one through the walls or roof space instead. Whether that suits depends on where the pipe goes.

How do I know if I have a leak under my slab?

A warm spot on the floor, damp floor coverings with no wet area nearby and a meter that moves with every tap off are the usual signs.

Why is there a soggy patch in my lawn when it hasn't rained?

Often a leak in the buried pipe between the meter and the house, or to a garden tap. Check the meter with everything off. If it moves, call us.

How much does a slab leak repair cost?

It depends on how long the leak takes to find and whether we repair it in place or re-run the pipe. Call 0438 356 081 to talk it through.

How it works

How a job works

  1. Call or book online

    Tell us what's happening and where. A photo of the problem or the appliance label helps.

  2. We talk it through

    We'll get back to you, and if the job needs seeing before it can be priced, we'll book a time to come out.

  3. Details in writing first

    Before work starts you get the plumber's name, licence or registration number and our business address in writing.

  4. Done and tested

    The job is tested before we leave, with a certificate of compliance where one is needed.

Enquire

Tell us what's going on

Send the details and a photo or two and we'll get back to you to book it in. If water or gas is escaping, call 0438 356 081 instead.

Leak detection and repair across Ballarat

Our team works across Ballarat and the surrounding towns.

See the areas we cover

Need a plumber in Ballarat?

Call 0438 356 081 or book online and we will get back to you.