Leak detection and repair

Burst pipe repair in Ballarat

Pipe burst? Turn off the water at the mains and call us. Our team finds the damage, replaces it and gets your water back on.

  • Plumbing, gas and drains
  • Certificates of compliance where required
  • Local Ballarat team
A plumber cutting out a split section of copper pipe under a Ballarat house, water off and the replacement section ready

Before we get there

If you can do it safely:

  1. Turn off the water at the mains tap, usually beside the meter near your front boundary.
  2. If water has reached power points or lights, turn the power off at the switchboard, but only if you can reach it without standing in water.
  3. Keep everyone out from under a sagging ceiling.
  4. Call us on 0438 356 081.

Frosty nights and old pipes

Ballarat Airport's average July minimum is 3.2°C, and on the coldest nights an exposed pipe can freeze and split. You often don't see the leak until it thaws. Old galvanised pipe, failed flexi hoses under sinks and a stray shovel are the other usual causes.

How we repair it

1. Make it safe

The water stays off, and anything electrical that got wet is left alone until it's checked.

2. Expose the damage

We open up the damaged section and check it. If old pipe is thin elsewhere too, we'll tell you.

3. Replace and test

We cut out the split section or failed hose, replace it, turn the water back on and check the repair under pressure.

After-hours call-outs: 24 hours a day, 7 days. Call 0438 356 081.

A burst copper pipe with a frost split beside the new section that replaced it

What it costs

It depends on where the pipe is and how much needs opening up and replacing. We charge a call-out fee plus an hourly rate, or a fixed price when the job needs a quote first Typical Ballarat prices are in our guide to what a plumber costs.
Call-out
Ask when you call
Repair
Depends on where the pipe is and access

Questions people ask

Is a burst pipe an emergency?

Yes. Water keeps flowing until the mains is off, and it can reach ceilings and electrics fast. Turn it off and call us. More first steps on our plumbing emergencies page. For renters, Consumer Affairs Victoria lists a burst water service as an urgent repair.

Can a burst pipe be repaired, or does the whole pipe need replacing?

Usually just the damaged section. The whole run only needs replacing if it's corroded along its length, which is more likely with old galvanised pipe. We'll tell you which once we've seen it.

Where's my water mains tap?

Usually beside the water meter, near your front boundary.

How much does it cost to fix a burst pipe?

It depends on where the pipe is. Call 0438 356 081 and tell us what's happened.

How it works

How a job works

  1. Call or book online

    Tell us what's happening and where. A photo of the problem or the appliance label helps.

  2. We talk it through

    We'll get back to you, and if the job needs seeing before it can be priced, we'll book a time to come out.

  3. Details in writing first

    Before work starts you get the plumber's name, licence or registration number and our business address in writing.

  4. Done and tested

    The job is tested before we leave, with a certificate of compliance where one is needed.

Enquire

Tell us what's going on

Send the details and a photo or two and we'll get back to you to book it in. If water or gas is escaping, call 0438 356 081 instead.

Leak detection and repair across Ballarat

Our team works across Ballarat and the surrounding towns.

See the areas we cover

Need a plumber in Ballarat?

Call 0438 356 081 or book online and we will get back to you.