Plumbing

Bathroom and kitchen renovation plumbing in Ballarat

Renovating a bathroom, kitchen or laundry? We plan the plumbing with you before the walls come off, rough it in, fit it off once the tiles are done and hand over the certificate at the end.

  • Plumbing, gas and drains
  • Certificates of compliance where required
  • Local Ballarat team
A bathroom stripped back to the studs and floor joists during a renovation, with the floor open for new pipework

When to bring us in

  • Moving a toilet, shower, basin or sink to a new spot.
  • Swapping a shower-over-bath for a separate shower.
  • Opening up walls with old pipes in them, the cheapest time to replace them.
  • Adding a laundry trough, gas cooktop or new hot water system.

Call us before the tiler and cabinet maker are booked. Moving a toilet or floor waste means altering the drain under the floor, and that's best planned up front.

What we take care of

Hot water at the new bathroom taps must be no hotter than 50°C, so we fit or check the tempering valve. Plumbing work worth $750 or more, and any new below-ground drain, comes with a certificate of compliance within 5 days. Moving a gas cooktop is gasfitting: see gas appliance installation.

How we plumb your renovation

Plan and quote

We look at the existing pipes, where the new fixtures go and what's behind the walls, then price it. Have your fixture list ready, because the tap and mixer types decide what goes in the wall.

Rough-in

With the walls open we run the water and waste pipes, set the mixer bodies and floor wastes, and pressure-test before anything is covered.

Fit-off

Once tiling and cabinetry are done we fit the taps, toilet, basin, sink and shower, connect the dishwasher and laundry, and check for leaks and bathroom temperature.

A new laundry trough and wall-mounted mixer tap, finished and connected

What it costs

How we quote: a call-out fee plus an hourly rate, or a fixed price when the job needs a quote first. Replacing fixtures in the same spots costs far less than moving them.
Rough-in and fit-off
Quoted once we've seen the room and your fixture list.
Your own fixtures
Mention them when you book, and choose them before rough-in.

Questions people ask

Do I need a plumber for a bathroom renovation?

Yes, for the plumbing. Moving or adding pipes, drains, showers, basins and toilets is plumbing work. Demolition, waterproofing and tiling can be other trades.

What does rough-in mean?

The plumbing done before the walls are closed in: pipes, wastes and mixer bodies. Fit-off is the second visit, when the taps, toilet and basin go on.

Will I get a compliance certificate?

Yes, if the plumbing is worth $750 or more, which most renovations are. It arrives within 5 days. See licences and certificates.

Do I need a plumber to move a kitchen sink?

Yes. It means new water and waste pipes. We'll plan it with your cabinet maker so the pipes come up where the new cabinet needs them.

How it works

How a job works

  1. Call or book online

    Tell us what's happening and where. A photo of the problem or the appliance label helps.

  2. We talk it through

    We'll get back to you, and if the job needs seeing before it can be priced, we'll book a time to come out.

  3. Details in writing first

    Before work starts you get the plumber's name, licence or registration number and our business address in writing.

  4. Done and tested

    The job is tested before we leave, with a certificate of compliance where one is needed.

Enquire

Tell us what's going on

Send the details and a photo or two and we'll get back to you to book it in. If water or gas is escaping, call 0438 356 081 instead.

Plumbing across Ballarat

Our team works across Ballarat and the surrounding towns.

See the areas we cover

Need a plumber in Ballarat?

Call 0438 356 081 or book online and we will get back to you.