Plumbing
Plumbing repairs and maintenance for Ballarat homes
Weak pressure, pipes that bang, a slow leak under the sink or a new dishwasher to connect: these are the everyday jobs our team sorts out across Ballarat.
- Plumbing, gas and drains
- Certificates of compliance where required
- Local Ballarat team

Jobs we're called out for
- Weak flow at every tap, or at just one.
- A bang in the wall when a tap or the washing machine shuts off.
- A damp cupboard floor or a stain spreading on a wall or ceiling.
- A water bill higher than usual for no reason (high water bill leaks).
- A dishwasher, washing machine or fridge to connect.
Water leaking where it shouldn't? Turning it off at the meter, usually near the front fence, stops the damage until we arrive.
What's usually behind it
Low pressure is usually a partly closed valve, a hidden leak or old pipe narrowed inside. Banging pipes are loose clips, high mains pressure or a fast-closing appliance valve. Visible leaks are mostly perished flexible hoses and loose fittings. Leaks you can't see are a job for leak detection.
How we fix it
Find the cause
One tap or the whole house, hot or cold, all the time or only when an appliance runs. We start there, then check the meter, valves and pipework.
Fix it properly
Worn parts are replaced rather than patched and loose pipes clipped. High pressure gets a limiting valve, and banging gets an arrestor near the appliance. If a run of old pipe is failing, we tell you before going further.
Connect your appliances
We put in the water point and drain your dishwasher, washing machine or fridge needs, and connect it. Work worth $750 or more comes with a certificate of compliance within 5 days.

What it costs
- Bigger repairs
- If it turns out to be more than a quick fix, we'll talk it through before going further.
- After hours
- 24 hours a day, 7 days
Questions people ask
What causes low water pressure in a house?
A partly closed valve at the meter, a hidden leak or old narrowed pipe. If only one tap is weak, it's usually that tap. If the whole street has it, call Central Highlands Water on 1800 061 514.
Does water hammer need to be fixed?
Yes. Each bang shakes the pipes and strains the joints over time. The fix is usually simple: clipping pipes, a limiting valve or an arrestor.
Do I need a plumber to install a dishwasher?
If it needs a new water point or drain, yes. For a full kitchen refit, see bathroom and kitchen plumbing.
Why has my water bill gone up?
Usually a leak: a running toilet, a dripping tap or a pipe leaking out of sight. See high water bill leaks.
How it works
How a job works
Call or book online
Tell us what's happening and where. A photo of the problem or the appliance label helps.
We talk it through
We'll get back to you, and if the job needs seeing before it can be priced, we'll book a time to come out.
Details in writing first
Before work starts you get the plumber's name, licence or registration number and our business address in writing.
Done and tested
The job is tested before we leave, with a certificate of compliance where one is needed.
Enquire
Tell us what's going on
Send the details and a photo or two and we'll get back to you to book it in. If water or gas is escaping, call 0438 356 081 instead.
Form not loading? Open the booking form in a new tab or call 0438 356 081.
Plumbing across Ballarat
Our team works across Ballarat and the surrounding towns.
Need a plumber in Ballarat?
Call 0438 356 081 or book online and we will get back to you.
