Cost guide
What a plumber costs in Ballarat
Our plumbers work across Ballarat, and we tell you how your job will be charged before any work starts. Send us a photo or a quick description so the plumber can bring the right parts.
- Plumbing, gas and drains
- Certificates of compliance where required
- Local Ballarat team

Our team prices plumbing and gas jobs across Ballarat and explains how your job is charged before work starts. The bill mostly comes down to time on site, parts and the time of day, and installing, moving or replacing a gas appliance in Victoria needs a compliance certificate whatever the job costs.
How we price your job
We charge a call-out fee plus an hourly rate, or a fixed price when the job needs a quote first.
When you call, tell us what's going on and send a photo if you can: the tap, the leak, the model on the toilet cistern. The more we know, the more likely the plumber arrives with the right parts and finishes in one visit.
Got a few small jobs around the house? Put them on the one booking. A dripping tap, a running toilet and a loose shower rose cost less done together than across three visits.
What moves the bill
Time, parts and access. A new tap washer is a quick job; a whole new tap depends on the style and how easy it is to reach. A burst pipe under the sink is quick to fix, one inside a wall takes longer to reach and make good. See taps and toilets and burst pipe repair.
After-hours work costs more than the same job in business hours, so if it can safely wait until morning, it usually should. Our after-hours terms: 24 hours a day, 7 days. See emergency plumber.
Gas work
Installing, moving or replacing a gas appliance in Victoria needs a compliance certificate whatever the job costs (Building and Plumbing Commission). We'll tell you before we start whether your job needs one. See gasfitting.
A gas heater service or a hidden water leak search depends on the appliance, where it's installed or how long the leak takes to find, so we'll explain how it's charged when you book. Energy Safe Victoria makes the same point about heater services. See gas heater service and leak detection.
Market guide prices
| Job | Market guide range |
|---|---|
| Call-out or service fee | $60–$150 |
| Call-out fee, Victoria | $150–$300 (GST not stated) |
| Hourly rate, business hours | $80–$200 |
| Hourly rate, after hours | $150–$250 |
| Emergency or after-hours visit | $250–$700 |
| Full emergency visit, Victoria | $300–$700 (GST not stated) |
| Replace a tap washer | $80–$150 |
| Fix a leaking tap | $80–$260 |
| Replace a tap | $150–$500 per tap |
| Toilet repair | $150–$350 |
| Replace a toilet cistern | $250–$500 |
| Toilet, supplied and fitted | $400–$900 |
| Toilet, basin or sink installation | $250–$600 (GST not stated) |
| Burst pipe repair | $200–$800 |
| Gasfitter hourly rate | $100–$200 |
| Gas cooktop connected to an existing point | $150–$450 |
| Gas oven installation | $180–$500 |
| New gas bayonet or outlet | $250–$650 |
| Flued gas heater installation | $300–$900 |
| New gas line run | $500–$2,000 |
| Find and repair a gas leak | $200–$600 |
Published market guide ranges for Australia and Victoria, checked October 2026, including GST unless marked. They are not our prices: we quote your job.
Book a plumber in Ballarat
Call us on 0438 356 081 or book online and tell us what needs doing. For drains and hot water, see what a blocked drain costs to clear and what a new hot water system costs, or see all our plumbing services. You can also send an enquiry.
Questions people ask
Do plumbers charge for quotes in Australia?
Some do and some don't, so it's worth asking before anyone comes out. When you call us, we'll tell you how your job is charged before we book the visit.
How much does an emergency plumber cost?
More than the same job in business hours, because after-hours rates are higher. If the problem can safely wait until morning, it will cost you less. If water is running and won't stop, turning it off at the meter buys you time. Call us on 0438 356 081.
How much should I pay for a plumber?
It depends on the time on site, the parts and when the work is done. A simple repair sits at the low end; installations and gas work cost more because they take longer and need parts. Putting several small jobs on one booking is the easiest saving.
Does gas appliance work need a compliance certificate?
Yes. In Victoria, installing, moving or replacing a gas appliance needs a compliance certificate from a licensed gasfitter whatever the job costs (Building and Plumbing Commission). We'll tell you before we start if your job needs one.
Sources
- What's The Damage, Plumber hourly rates and call-out fees in Australia read 7 Oct 2026
- What's The Damage, How much does a plumber cost in Australia read 7 Oct 2026
- What's The Damage, Gas fitting cost read 7 Oct 2026
- hipages, How much does a plumber cost (updated 24 July 2026) read 7 Oct 2026
- Energy Safe Victoria, Open-flued gas space heaters FAQ read 7 Oct 2026
- Building and Plumbing Commission, Compliance certificates read 7 Oct 2026
Last checked October 2026.
More guides
- Guide
What a blocked drain costs to clear
Our team clears blocked drains across Ballarat, and when a drain keeps coming back, our drain specialist puts a camera down it so you pay to fix the cause, not to clear it again. If the blockage is in Central Highlands Water's pipe, CHW pays.
Read more - Guide
What a new hot water system costs
Our team repairs and replaces hot water systems across Ballarat. If yours has failed, we'll tell you whether a repair is worth it before you pay for a new system, and a replacement quote lists what's included.
Read more - Guide
Gas hot water and the 1 March 2027 rule
Our team still repairs gas hot water across Ballarat, and we can help you plan for the 1 March 2027 rule: from then, a gas system that breaks and can't be repaired must in most cases be replaced with electric. A working system can stay.
Read more
Need a plumber in Ballarat?
Call 0438 356 081 or book online and we will get back to you.
